|
FD3S Tune Up Parts
|
Engine Mount Set
Our mount set helps limit undesirable vehicle movement and provides a better and more direct steering & throttle response.
|
$1,164.00
1
|
|
|
High Performance Throw-out Bearing
Our High Performance throw-out bearing for the Sports Clutch Kit
|
$108.00
|
|
Click to enlarge
|
4.7 Final Gear Set
Our Final Gear Set provides more torque to the ground in each gear, and it improves the slow acceleration at low rpm range. Gear ratio 4.7
|
$1,050.00
|
|
Click to enlarge
|
Brake Hose
Eliminating the spongy feel, the Brake Hose provides more direct and liner braking performance.
|
$390.00
|
|
Click to enlarge
|
Large Capacity Brake Master Cylinder
A Large Master Cylinder significantly enhances the brakes stability.
|
Discontinued
|
|
|
Brake Caliper overhaul
We will overhaul & repaint your brake caliper. The caliper has to be sent to Fujita in Japan.
|
$580.00
|
|
Click to enlarge
|
Brembo™ Brake Caliper Kit
Dramatic increase on stopping power over the stock caliper. The Brembo Brake Caliper Kit can be used with the stock brake rotors. Currently not available
|
N/A
|
|
Click to enlarge
|
130A Large Capacity Alternator
By providing very stable electricity, it contributes to a stronger ignition and combustion. This alternator is also a good choice for the driver who uses a premium high watt sound system. (core exchange)
|
$899.00
|
|
Click to enlarge
|
In-tank Fuel Collector
Our In-tank Fuel Collector is designed to be used inside the fuel tank. It is very effective in preventing fuel starvation & air inflow to the fuel pump from g-force load when corning or drifting.
|
$244.00
|
|
|
FD3S & FC3S Transmission Overhaul
It takes about 2 weeks to overhaul the transmission
|
$2,160.00
|
|
|
3.7 Final Gear Set
The original 3.7 gear ratio final. This special final is designed for attaining the maximum top speed from the engine. It also works well with HKS sequential transmission.
|
$3,700.00
|
|
Click to enlarge
|
Rear big brake rotor kit
The diameter of this rotor is 322mm and the bell housing is made of aluminum for a lighter weight. It restores the optimal balance for the customers who installed a bigger front brake system.
|
$1,786.00
|
|
Click to enlarge
|
13BT Weight Controlled Stock Rotor set
The two rotors in this set are matched to +/- 7g for excellent engine balance.
(Without proper selection, the weight difference could be as high as 100g)
|
Please refer
|
|
|
© Copyright 2008 Performance Partners International. All rights reserved
|
|